Bench active · EN ↔ TH · TEL +66 02-859-2145 · NDA from first email · 1-hour quote SLA
EN TH
Request a Proposal

Emission Factors: Where Thai Companies Get Carbon Measurement Wrong

An emission factor converts activity data — litres of diesel, kilowatt-hours, kilograms purchased — into greenhouse-gas emissions. Choose the wrong factor and the whole inventory is wrong, however careful the rest of your work. The most common Thai mistakes are using outdated global factors, the wrong grid factor for Scope 2, and mismatched GWP values.

What is an emission factor, and why does it matter?

Every line in a greenhouse-gas inventory follows one equation: emissions = activity data × emission factor. Litres of diesel multiplied by a kgCO₂e-per-litre factor; kilowatt-hours multiplied by a grid factor; kilograms of material multiplied by a cradle-to-gate factor. Each factor quietly embeds assumptions — fuel composition, the national grid mix, and the global-warming-potential horizon used to convert methane and other gases into CO₂-equivalent.

Because factors multiply straight through, a 10% error in a factor is a 10% error in that number — yet the factor is usually the least-scrutinised input in the whole exercise. Teams pour effort into collecting activity data and then reach for whatever factor is nearest to hand. That is the quiet failure point in many Thai inventories, and the first thing a competent verifier will probe. It is also the cheapest error to prevent: getting the factor right costs nothing extra at the point of calculation, while getting it wrong can mean restating a figure you have already published.

An emission factor converts activity data — litres of diesel, kilowatt-hours, kilograms purchased — into greenhouse-gas emissions.

Emission Factors: Where Thai Companies Get Carbon Measurement Wrong

Where do Thai companies get emission factors wrong?

The same handful of errors recur across organisations:

Mistake Why it is wrong The fix
Using global or overseas factors for Thai operations Thai fuels, grid and processes differ from UK/US defaults Use TGO factors as the first choice
An outdated grid factor for Scope 2 Thailand’s grid factor shifts as the generation mix changes Apply TGO’s current published grid emission factor
Mixing GWP versions (AR4, AR5, AR6) Produces inconsistent CO₂e and non-comparable years Choose one IPCC set and document it
Coarse spend-based Scope 3 Baht multiplied by a factor is only a rough proxy Move material categories to supplier or activity data
Unit and boundary slips Gross vs net calorific value, or the wrong units Check units and record the methodology
Frozen factors year to year Factors are updated; stale ones drift from reality Version factors and review them annually

Which emission factors should Thai companies use?

Work down a clear hierarchy, and record the source, year and version of every factor you apply:

  1. Primary data — supplier- or site-specific factors, where you can obtain them, are always the most defensible.
  2. TGO Emission Factor database — Thailand’s national factors for local fuels, materials and processes.
  3. The current Thailand grid emission factor — for purchased electricity under Scope 2.
  4. IPCC GWP values — state which Assessment Report you are using and apply it consistently.
  5. International sets (IPCC, IEA, DEFRA) — only as a documented fallback where no Thai factor exists.

The ordering matters as much as the sources. A verifier is not only checking whether your factors are plausible, but whether you can justify why you chose each one. Two inventories can use the same activity data and reach very different totals purely through factor selection, which is exactly why the choice has to be deliberate and documented, not incidental.

Location-based or market-based — which Scope 2 method applies?

The GHG Protocol Scope 2 Guidance asks for two figures where contractual instruments exist. Location-based Scope 2 uses the average grid factor — the Thailand grid emission factor. Market-based Scope 2 reflects what you have contracted for: renewable power purchase agreements, RECs or I-RECs, or green tariffs.

If you buy renewable electricity or certificates, you report both numbers. A green claim without valid, retired instruments behind it is unsupported — and under FTSE Russell scoring and TSRS/IFRS S2 disclosure, an unsupported claim is a greenwashing risk. Get this wrong and you either overstate your progress or understate your real exposure.

Why is Scope 3 the hardest place to get factors right?

Scope 3 is where factor choice does the most damage, because most companies start with spend-based factors — multiplying baht spent by an economic input-output factor. It is a defensible starting point, but it is coarse: it assumes every supplier in a category is equally carbon-intensive, so cutting a supplier’s real emissions does not move your number at all. Two firms with identical spend look identical, however different their actual footprints.

The fix is to climb the data-quality ladder over time: move material categories from spend-based to average-data factors, then to supplier-specific primary data for your largest sources. Watch for double counting, where a supplier’s Scope 1 is your Scope 3, and keep the methodology documented so year-on-year comparisons stay honest. Prioritise the categories that dominate the footprint rather than chasing precision everywhere.

How does software reduce emission-factor error?

Good carbon accounting software holds a managed, versioned factor library, applies the right factor by activity type, keeps TGO and grid factors current, and records exactly which factor, version and source produced each figure — the audit trail an ISO 14064-3 verifier expects. It removes the copy-paste errors that spreadsheets invite.

Software still needs judgement, though. Someone has to decide when primary data beats a database factor, and defend every market-based claim. That is why an Othello CFO engagement pairs a platform that is powered by KClimate and delivered by Othello with TGO CFO-certified practitioners. (Note the scope: a CFO under ISO 14064-1 measures your organisation; product-level factors belong to a CFP under ISO 14067, a separate exercise.) To pressure-test the factors behind your inventory, book a short call.

Turn your carbon numbers into a scored disclosure

We build TGO-certified CFO/CFP footprints and convert them into the FTSE-legible English climate disclosure that raters actually read.

TGO CFO & CFP

Before your next disclosure cycle

See where your English edition is losing FTSE points.

A free Gap Audit maps your published English disclosure against FTSE Russell’s 14 themes — and shows exactly which gaps are quietly costing you points, index inclusion and investor attention.

ISO 17100 · NDA from the first email · 100% in-house Bangkok bench
Facebook
Twitter
LinkedIn
WhatsApp
Get Free Quote

Answers

Frequently asked questions

What are emission factors and why do they matter for a Thai company's carbon footprint?
Emission factors are the coefficients that convert activity data, such as litres of fuel, kilowatt-hours of electricity, or kilograms of material, into greenhouse gas emissions. Choosing the wrong factor, or an out-of-date one, is one of the most common ways a Thai company's carbon numbers end up inaccurate. Othello helps companies select and document defensible factors so their footprint stands up to assurance and rating scrutiny.
Should Thai companies use local emission factors or international ones?
Where a credible Thailand-specific factor exists, such as the national grid electricity factor published by Thai authorities, it generally gives a more accurate result than a generic international value, but the right choice depends on the emission source and the reporting standard. The key is consistency and clear documentation of the source and version used. Othello advises on which factor set applies to each source and records the basis for audit.
How often should emission factors be updated?
Emission factors are revised periodically as grids decarbonise and datasets improve, so a footprint built on last year's factors can drift from reality. Good practice is to check for updated factors each reporting cycle and to disclose which version you used. Othello builds this version control into the inventories it prepares so year-on-year comparisons stay valid.
FTSE 2026 PlaybooksFree ESG disclosure guides
Chat on LINEแอดไลน์ · ตอบใน 1 ชม.
Add Othello ESG on LINE (QR code)
แอดไลน์ · Add us on LINE
Scan to chat with Othello ESG on LINE — a reply within one business hour, under NDA from the first message.
Open LINE →
Recognised & delivered Credited in DLA Piper × UK PACT × DCCE’s carbon-pricing report · SET JUMP+ Advisory Pool listed advisor · FTSE Russell 4.0/5.0 delivered · ISO 17100 certified
Get a 1-hour quote →

Research & Reports

Free Tools

ISSB Training

· YouTube
Free tools & research State of ESG Disclosure· ESG Rating Check· FTSE 2026 Playbooks· Regulation Radar· Greenwashing Checker